Installing Recessed Lighting: What You Need to Know

When it comes to lighting, there are a few special considerations to keep in mind when installing recessed lighting. To ensure that the light is effective, it should be placed above the workstation, not above where you will be sitting or standing. Additionally, it should be at least two feet away from the walls. Task lighting is used in areas where work is done to reduce eye strain, such as under kitchen cabinets or a decorative hood.

When installing recessed luminaires in damp or wet spaces, such as a bathroom or outdoor area, use a special sealed molding to prevent water damage. If the project is too advanced for your skills, have a qualified electrician install the new lights. Recessed lamps are often more expensive than traditional basic hanging or surface-mount lamps.If you don't have enough ceiling space, you may need to install recessed lights instead. Once installed, recessed lights are no more difficult to maintain than standard lamps; it's simply a matter of changing the bulbs when they burn out.

Know your home and its construction before buying any lighting component, as each installation will be unique. This is because a recessed lamp must include a metal structure, a housing to hold the bulb and the socket, and an integrated cable connection box where the lamp is connected to the circuit wiring.

Wafer-type

recessed lights measure approximately ½ inch and stick directly to drywall. If your goal is to use recessed lights as task lighting, you'll use the same formula as for ambient lighting, unless your work area is close to a wall. If you have a sloped ceiling, there are certain steps you need to take when installing recessed lamps.

Many new recessed luminaires, especially those dedicated to LED bulbs, are much smaller and easier to install inside the openings of existing ceiling luminaires.Semi-recessed lights do not require cutting the ceiling if there is a junction box. Choose recessed lamps when you want a hidden and discreet look for your decorative or work lighting. Most recessed lights are installed inside attics, so it's important to be careful with vermiculite and asbestos insulation. Some types of recessed luminaires have rotating turrets that allow you to direct the lighting wherever you want.Installing recessed lighting can be an intimidating task for many homeowners.

However, with some basic knowledge and preparation, it can be done safely and effectively. To begin with, it's important to understand that recessed lighting should be placed above the workstation and at least two feet away from walls. Additionally, if installing in damp or wet spaces such as bathrooms or outdoor areas, use sealed molding to prevent water damage. It's also important to note that recessed lights are often more expensive than traditional hanging or surface-mount lamps.

When it comes to installation, there are several types of recessed lights available on the market today. Wafer-type recessed lights measure approximately ½ inch and stick directly to drywall while semi-recessed lights do not require cutting the ceiling if there is a junction box. Additionally, many new LED-dedicated luminaires are much smaller and easier to install inside existing ceiling luminaires. When installing in sloped ceilings or attics, it's important to take extra precautions due to potential vermiculite and asbestos insulation present in these areas.

Lastly, some types of recessed luminaires have rotating turrets that allow you to direct the lighting wherever you want for added convenience. In conclusion, installing recessed lighting can be an intimidating task for many homeowners but with some basic knowledge and preparation it can be done safely and effectively.